Regency Mansfield see through double-sided wood heater

Regency Mansfield Wood See-Through Fireplace

There are 2 sides to every fire. This see-through gives you 2x the viewing area and 2x the control. Regency now provides an option to choose 2 rooms that benefit from this wood heater. Designed to not only meet, but exceed the very latest Australian requirements for emissions and efficiency, this is the latest in heating technology.

Standard Features

  • Heats approx. 100-200 square metres* (depending on the number of fans fitted and ducting kits)
  • Large see-through glass viewing area (790mm x 310mm)
  • Draft control, accessible on each side, with airwash
  • Removable door handle tool
  • Wood loading ability, on each side
  • Stainless steel andirons
  • 5mm steel firebox – lined with high quality firebrick
  • Reduced Clearance box included
  • Low emissions: 1.3 g/kg
  • 63% efficiency


  • Slim line finishing trims available (30mm & 50mm)
  • Base frame kit – raises unit 300mm on sturdy steel frame
  • Heat distribution kit with flexible ducting, up to 2 can be used
  • Outside air kit with flexible ducting
  • Regency triple skin, zero clearance, wood fire flue kit available (must be used with this appliance)

*Heating capacity and any burn times are a guide only and can be affected by some or all of the following examples: drafts under doorways or between floorboards, large glass areas not covered by heavy drapes/curtains, green, wet or damp wood, ceiling heights greater than 2.4 metres or cathedral type ceilings, poor or no insulation.

A Regency wood fire is a high quality product that will last for years to come. This wood fire can only be purchased at our South Coast showroom:

16 Wright Road, Goolwa
Phone: 08 8554 2860 | Email:
Opening hours: Mon to Fri, 9am to 5pm

Regency Mansfield dimensions, framing and clearances